1920_ Bakelite_ Switch_ With_ Base

3D Model

This is a 3D print designed to be fitted over UK 85mm light switch boxes. The fake bakelite switch is removable to allow access to the real switches underneath. Printed at 100% scale on a callibrated printer will fit snugly on a switch box without the need for tape or glue. Print at 101% for 1970’s era switch boxes for a better fit as they tend to be slightly larger. If in doubt, go larger and use tape on the inside of the switch cover to reduce the width for a better fit. I used printable transfers on a base coat of brown acrylic to creat an old oak look for this one. https://imgur.com/rSG2uLW