CR10 S5 Bed Camera Mount

3D Model

This Wyze Cam V2 mount for a Creality CR-10 S5 is a near-final version (V4) of months of work. The legs attach to the bottom bed mount holes on the aluminum frame using M4 screws. Depending on the lengh of the screws, you may need to use washers, as there isn’t much clearance left in the holes from the bed mounting screws.

• The stronger the filament you can print this with the better. I used Overture PLA Pro and it’s been working well, for the most part, but I may redo using carbon fiber filament
• Print with supports, but be VERY careful removing them, as the ‘legs’ can fracture
• Use as much infill as possible, especially in the legs. I used Cura and segmented the legs to have 100% infill up to the curves (on the outside legs) and where they attach at the base (for the inside legs). For the base I used 20 or 30% infill, I don’t recall, but you want to try to keep the base as light as possible