Impact Testing Machine Charpy

3D Model

In this test the specimen is positioned across the lowest point in the path of a striker mounted at the end of a pendulum as shown in Figure 1. The striker, having been initially lifted to a specific height h1, and then released, swings against the specimen and breaks it. The striker continues its swing to the other side of the specimen to a height h2. Clearly the difference between the two heights multiplied by the weight of the striker corresponds to the amount of energy that is absorbed in fracture. Izod Impact Test: In the Izod impact test, the test piece is a cantilever, clamped upright in an anvil, with a Vnotch at the level of the top of the clamp. The test piece is hit by a striker carried on a pendulum which is allowed to fall freely from a fixed height, to give a blow of 120 ft lb energy. After fracturing the test piece, the height to which the pendulum rises is recorded by a slave friction pointer mounted on the dial, from which the absorbed energy amount is read. Charpy Impact Test: