Smart Car 3D Scanned by Artec Ray

3D Model

The complete model of this Smart car was created from approximately 10-13 scans taken from various positions around all sides of the vehicle. We kept 10 spheres (from a Laser Scanner Reference Sphere Set) in the scanner’s field of view while capturing. We also took two scans from below, with the car raised on a car lifter.

In order to get the best results, all glass surfaces and shiny parts sprayed with talc before scanning.

The raw data were processed in Geomagic Design X software. Alignment and triangulation allowed us to get the final 3D model of the Smart car.

https://www.artec3d.com/3d-models/smart-car