SPROG3 DCC Command Station Programmer Cradle

3D Model

A specially-designed cradle for fixing a SPROG3 DCC command station module to a board, wall or other peiece of equiment. This may well work with other SPROG versions as most appear to use the same enclosure, but it’s only been checked with the SPROG3.

We recommend that this is printed with the screw brackets on the built plate, text facing upright. Support strucutre must be used. 100% fill and 0.01mm layer heights. PLA is fine, but ABS or PETG may be a better option where it may be frequently installed/removed or may be subject to unintentional knocks.