Sunbird Flag is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete (X-base shown in model). We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.