3d Printable Pneumatic-Engined Toy Car

3D Model

Here you can see it in action: https://youtu.be/9Cofmy4bZX4

Uh…didn’t find a way to attach a package with .stl files. Here they are: https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it “vapemobile” because of the remote shape).

Apart from these printed parts, you’ll need some extra ones to assemble it:

• 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
• Piece of 1.75mm filament
• Rubber band
• Thin plastic bag
• 6mm silicon pipe (can be found in any aquarium shop)
• 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
• Two 2ml syringes
• 8mm piece of 4mm PTFE tube (optional)
• Air balloon
• Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
• M3 washers x10
• M3 nuts x30